If you find that you are good with work that involves your hands, consider giving woodworking a try. From measuring to cutting to piecing things together, it is a fun way to spend your time. The tips below will help you get started on the right foot, ensuring your first project is a great one.
Create sanding blocks you can reuse. Make a list of each sandpaper grit that you typically use, and then cut a full six blocks for each from scrap plywood, 3/4" thick. Try to be sure that they measure roughly 2.5 inches by 4.75 inches.
Use a spray glue on the blocks and the tile square. Stick a single block onto the cork and make sure you're cutting the cork in a flush way using your utility knife. Put adhesive on the sandpaper sheet and then apply it to the cork blocks face down. Cut the sandpaper flush and label the block.
Try using a stair gauge as a crosscut guide. Clamp these gauges to the carpenter's square you have and be sure they're matching up to the stair jack's run and rise. Mark the notches, if they're on the same carpenter square's tongue, that combination can create the perfect guide for a crosscut using a circular saw.
Refrain from putting your fingers near your cut. Instead, make use of a longer, thinner piece of wood that can push it along the saw's surface. That will help you keep your fingers, which you need to be a great woodworker.
Check out your local library for books on woodworking. You will likely find books that contain tips, special skills, or even step-by-step guides that can take you from start to finish on a project. A library can be an excellent source of information that people tend to forget when they are looking for knowledge, so do not let this resource slip your mind.
Be sure your blades are sharp before you start sawing. Dull blades make work harder, plus they are a safety hazard, especially on power saws. It could also lead to costly errors, depending on what type of wood you are using.
Do you find that your joint compound seems to dry out in between uses? There is a simple fix to help keep your joint compound moist. Pour a small amount of water on top of your joint compound before sealing it. The next time you need to use the joint compound, drain off the excess water, and your joint compound will be perfectly moist.
When buying wood for your woodworking project, always buy long and not to the exact measurements. Some stores will sell you wood that is cut to length. Always measure long and trim down to the exact size you need in your shop. This way if you made a minor error in measurement, you would have a little bit of extra wood to cut off or utilize to make up for the difference.
Save some money and practice woodcraft skills by building essential items for your work-space. Build some counters to work on and a workbench. Get creative, and you can make your work-space even more organized and efficient since you can organize the area.
Never allow someone to watch while you are woodworking without wearing the same gear that you are wearing. Being anywhere near the tools is a hazard, even if they are not using them. Wood or parts of the tool could fly into the air and strike them just as they could you.
There are many tools used for carpentry, but you may not want the expense involved with acquiring them. Look at your project and see if there might be a more reasonable solution to this cost. You may find that a cheaper tool can give you the same result as some of the expensive ones.
Choose your woodworking tools and equipment carefully if you live in a small space such as an apartment. You can still enjoy completing carpentry projects but might have to forgo the 14-inch band saw. Pick tools that will do what you need but don't take up too much space.
Consider a cabinetmaking class at your local community college. The skills and experience you pick up can go a long way towards getting started. Even if you already are a woodworker, you'll meet others who have an interest in the field. These are future friends or possibly even potential professional relationships waiting for you to explore.
Use tape to catch excess glue. Glue seeping out of joints can stain some wood, but this can be avoided using regular masking tape. First clamp your boards together without the glue, and tape across the join. Using a sharp blade, cut the tape along the join. When you glue the pieces, the excess glue will seep onto the taped edges of the board, where it can be easily peeled off.
Take the time to read all instructions before beginning any woodworking project. Doing this will help ensure that you understand all the steps involved and have all the necessary tools and supplies needed to complete the project. Gather the necessary materials and tools before beginning. Then, measure and cut each piece of lumber.
Keep your cords from tangling using inexpensive binder clips that you can pick up at your local office supply store. Wrap your cords around your electrical tools and use a claw style binder clip to snugly and securely keep the cords wrapped around each powered tool.
If you have a small, turned project, you can save time and give it a durable finish with cyanoacrylate glue. This glue dries to a glossy finish that is not dulled by repeated handling. That works great for small spindles used in book racks or plate dividers in kitchen cabinets.
If you are good with your hands, woodcraft is the activity for you. Take your time to absorb the knowledge you have gained here, and you'll find that entering the world of working with wood becomes easier. In the end, you'll find success with your projects and a new hobby to enjoy.